PROFIBUS DP Slave

The ProLinx BACnet/IP Client to PROFIBUS DPV0 Slave Gateway creates a powerful connection between a PROFIBUS Master and BACnet/IP devices. This stand-alone DIN-rail mounted protocol gateway provides a PROFIBUS Slave port and a single Ethernet port.

The ProLinx family A-B Remote I/O Adapter to PROFIBUS DPV0 Slave communications module (5605-RIO-PDPS) creates a powerful connection between devices on a Remote I/O network and a PROFIBUS master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and one PROFIBUS DPV0 Slave configurable DB9F port.

The ProLinx family ASCII Generic Serial to PROFIBUS DP Slave communications module (5105-ASCII-PDPS) creates a powerful connection between a PROFIBUS DP master device and an ASCII input device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one PROFIBUS DP Slave port and one ASCII configurable serial port.

The ProLinx family DF1 Master/Slave to PROFIBUS DP Slave communications module (5105-DFCM-PDPS) creates a powerful connection between devices on a PROFIBUS DP network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and one PROFIBUS DP Slave.

The ProLinx family DH-485 to PROFIBUS DP Slave communications module (5105-DH485-PDPS) creates a powerful connection between devices on a DH-485 network and a PROFIBUS DP master device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one DH-485 configurable serial port and PROFIBUS DP Slave port.

The ProLinx family DNP 3.0 Master to PROFIBUS DP Slave communications module (5105-DNPM-PDPS) creates a powerful connection between devices on a DNP 3.0 Master network and PROFIBUS DP Slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and PROFIBUS DB Slave port.

The ProLinx family DNP Slave to PROFIBUS DP Slave communications module (5105-DNPS-PDPS) creates a powerful connection between DNP and PROFIBUS Slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and one PROFIBUS Slave port.

The ProLinx family DNP over Ethernet to PROFIBUS DP Slave communications module (5205-DNPSNET-PDPS) creates a powerful connection between devices on a DNP over Ethernet network and a PROFIBUS master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one PROFIBUS DP Slave configurable DB9F port.

The ProLinx family EtherNet/IP to PROFIBUS DP Slave communications module (5205-DFNT-PDPS) creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS master device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and one PROFIBUS DP Slave configurable DB9F port.

The ProLinx family IEC60870-5-103 Master to PROFIBUS DP Slave communications module (5105-103M-PDPS) creates a powerful connection between devices on an IEC 103 network and a PROFIBUS DP slave device. The module, encased in aluminum (ProLinx Plus 5000 series), is a stand-alone DIN-rail mounted protocol gateway that provides one PROFIBUS DP Slave configurable DB9F port and one IEC 103 Master configurable serial port.

The IEC 60870-5-104 Server to PROFIBUS DP Slave Gateway creates a powerful connection between devices on an IEC 104 network and PROFIBUS DP Master devices. This stand-alone DIN-rail mounted gateway provides one PROFIBUS DP-V0 Slave DB9F port and one IEC 104 Server Ethernet port.

The 104S gateway accepts and responds to commands from a network-connected Client (Master) and can also autonomously generate unsolicited messages for cyclic or event-driven data transmission. Firmware versions 3.00 and later support a wider range of IEC 60870-5-104 Edition 2 data types and Causes of Transmission than previously offered.

The PROFIBUS Slave protocol supports the PROFIBUS DP-V0 implementation, providing powerful data transfer capability between the ProLinx gateway and a PROFIBUS DP Master. With relatively few options to adjust, the PROFIBUS DP Slave configuration is quick, simple, and easily accomplished using the provided ProSoft Configuration Builder software.

The ProLinx family IEC60870-5-101 Slave to PROFIBUS DP Slave communications module (5105-101S-PDPS) creates a powerful connection between devices on an IEC 101 network and a PROFIBUS DP master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one PROFIBUS DP Slave configurable DB9F port and one IEC 101 Slave configurable serial port.

The ProLinx family Modbus Master/Slave to PROFIBUS DP Slave communications module (5105-MCM-PDPS) creates a powerful connection between devices on a Modbus network and a PROFIBUS DP Master device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one confgurable serial port and one DB9F PDPS port.

The ProLinx family Modbus Plus to PROFIBUS DP Slave communications module (5305-MBP-PDPS) creates a powerful connection between devices on a Modbus Plus network and a PROFIBUS master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Modbus Plus configurable DB9F port and PROFIBUS DP Slave configurable DB9F port.

The ProLinx family Modbus TCP/IP to PROFIBUS DP Slave communications module (5205-MNET-PDPS) creates a powerful connection between devices on a Modbus TCP/IP network and a PROFIBUS DP Master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides a single Ethernet port and a single DB9F PROFIBUS port.

The ProLinx family PROFIBUS DP Slave to HART Multi-drop communications module (5507-PDPS-HART) creates a powerful connection between devices on a PROFIBUS DP network and HART field devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one PROFIBUS DP Slave configurable DB9F port and 4 configurable HART Multi-drop channels.

The ProLinx family PROFIBUS DP Slave to Honeywell DEM communications module (5506-PDPS-DEM) creates a powerful connection between devices on a PROFIBUS DP network and Honeywell DE slave device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one PROFIBUS DP Slave configurable DB9F port and eight configurable Honeywell DE channels.