PROFIBUS DPV0 Slave Communication Module
MVI69-PDPS
The MVI69 PROFIBUS DP-V0 Slave Communication Module allows CompactLogix I/O compatible processors to interface easily with a PROFIBUS DP Master device.
Features and Benefits
The PROFIBUS DP-V0 Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the module and CompactLogix processors. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.
The MVI69 module Configuration/Debug Serial port connects a PC to the module for configuration, status, monitoring, and troubleshooting (Serial cable is included with product shipment). After editing on a PC, a configuration file is downloaded and stored on the MVI69 module.
The PROFIBUS DP-V0 Slave gives access to the unit's input and output images with up to 244 bytes of Input and Output data, for a maximum of 400 bytes total. These Input and Output data blocks are mapped by the user within the module's data memory allowing maximum flexibility and data transfer with other protocols.
Applications
With the growing usage of the PROFIBUS DP protocol in the industrial marketplace, this product has a wide variety of application uses. Industries that use this technology include:
- Power and distribution applications
- Petrochemical
- Water and Gas Applications
- SCADA and DCS applications
General Specifications
- Single Slot – 1769 backplane compatible
- The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module
- Ladder Logic is used for data transfer between module and processor. Sample ladder file included.
- Configuration data obtained from configuration text file downloaded to module. Sample configuration file included.
- Supports all CompactLogix processors: L20/L30/L31/L32/L35 and L43 (L43 supported with RSLogix 5000 v16)
- Also supports MicroLogix 1500 LRP
Hardware Specifications
|
Specification
|
Description
|
|
Dimensions
|
Standard 1769 Single-slot module
|
|
Current Load
|
800 mA max@ 5 VDC
Power supply distance rating of 2
|
|
Operating Temp.
|
0 to 60°C (32 to 140°F)
|
|
Storage Temp.
|
–40 to 85°C (–40 to 185°F)
|
|
Relative Humidity
|
5% to 95% (non-condensing)
|
|
LED Indicators
|
Power and Module Status
Application Status
Serial Port Activity
Serial Activity and Error Status
|
|
CFG Port (CFG)
|
RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
|
|
Shipped with Unit
|
RJ45 to DB-9M cables for each port
6-foot RS-232 configuration Cable
|
PROFIBUS Slave Port Specifications
|
Type
|
Specifications
|
|
General Parameters
|
|
Internal Database
|
400 registers (words) available
|
|
GSD File
|
Downloadable from ProSoft-Technology.com web site and on product CD
|
|
PROFIBUS Slave
|
|
Communication parameters
|
Baud Rate: 9.6 kbps to 12 Mbps
|
|
Supported I/O length
|
244 Bytes Input data
244 Bytes Output data
400 Bytes combined maximum
|
|
Supported PROFIBUS DP features
|
Freeze Mode
Sync Mode
Auto Baud Setting
|
|
Configurable Parameters
|
a) PROFIBUS Node Address: 0 to 125
b) Data byte swapping
c) Action on loss of PROFIBUS connection
d) Comm Fail Timeout Multiplier
|
|
Physical Connection
|
|
PROFIBUS Connector
|
Standard PROFIBUS DB-9F communication connector. Cable connection matches PROFIBUS pin out specification.
|
Functional Specifications
The PROFIBUS Slave gives access to the unit's input and output images with up to 122 words of Input and Output data, for a maximum of 200 words total.
- Supports all standardized baud rates, up to 12Mbps
- Configuration data is stored in non-volatile memory in the MVI69 module
- Supports extended diagnostic data (DPV0)
- Auto baud detection at all valid PROFIBUS V0 rates
- Multiple modules can be placed in a single rack
Ordering Information
| MVI69-PDPS |
PROFIBUS DPV0 Slave Communication Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
